|
Atlantis Outfitters Service Rates
|
|
Please note that the rates quoted are for labor only parts, are priced seperately. Feel free to ask for a quote.
|
|
|
|
Regulator Inspection / Service:
|
|
|
|
|
Retail
|
|
Repair per regulator set to include:
|
$60.00
|
|
1st stage, 2nd stage, std octopus & pressure gauge spindle service with SPG bubble check
|
|
Above repairs do not include depth or pressure gauges, Air 2, Air Sources, Octo Plus systems. If in addition to above regulator set.
|
$20
|
|
Repair per regulator set to include:
|
$65.00
|
|
1st stage, 2nd stage, integrated alternate & pressure gauge spindle service with SPG bubble check
|
|
Service for Air 2, Air Sources, Octo Plus systems - only
|
$25
|
|
Repair just pressure gauge spindle service with SPG bubble check
|
$10
|
|
Repair just 2nd stages. (Ea.)
|
$18.00
|
|
Repair just 1st stages (Ea.)
|
$20.00
|
|
Emergency Regulator Repairs (repairs needed within 5 days):
|
$ 30.00 extra per regulator
|
|
Regulators needing extra cleaning due to severe corrosion, neglect, or improper maintenance. This fee is additional to standard rate.
|
$30.00
|
|
Equipment Set-up fee (Regs and BCs not purchased from AO)
|
$50.00
|
|
Regulator Check (IP, breathing resistance, and leak test)
|
$22.00
|
|
Shop Materials (flat fee for all service
|
$3.00
|
|
|
|
BCD Inspection / Service:
|
|
|
|
|
Retail
|
|
Inspection only (not related to manufacturers required annual inspection)
|
$15.00
|
|
Service per BCD
|
$25.00
|
|
Service per BCD with Air 2, Air Source or Octo Plus systems service.
|
$50.00
|
|
Service per Air 2, Air Sources, Octo Plus systems service.
|
$25.00
|
|
|
|
Computer Inspection / Service:
|
|
|
|
|
Retail
|
|
Change Battery
|
$10.00
|
|
Change Battery with regulator service
|
$8.00
|
|
|
|
Cylinder Inspection / Service:
|
|
|
|
|
Retail
|
|
Visual Inspection
|
$10.00
|
|
Hydrostatic test
|
$20.00
|
|
Hydrostatic test w/Eddy Current Test (may be required per DOT
|
$27.00
|
|
Burst Disk Unit - Installed - Labor only (required at Hydrostatic test)
|
$6.00
|
|
Tumbling / Cleaning (Steel cylinders)
|
$30.00
|
|
Tumbling / Cleaning (Aluminum cylinders)
|
$25.00
|
|
O2 Cleaning (Doubles including manifold)
|
$98.00
|
|
O2 Cleaning (Singless including valve)
|
$40.00
|
|
O2 Cleaning (General per hour)
|
$30.00
|
|
Valve repair
|
$15.00
|
|
|
|
|
Dry Suit Repair
|
|
|
Retail
|
|
Seal Repair - pair of wrist
|
$35.00
|
|
Seal Repair - one wrist
|
$20.00
|
|
Seal Repair - neck
|
$25.00
|
|
Pressure Test
|
$25.00
|
|
Repair (Per hour one hour min)
|
$30.00
|
|
|
|
|
Commercial Equipment
|
|
|
Retail
|
|
Hat inspection and repair
|
$165.00
|
|
Any other repair work (Per hour one hour min)
|
$60.00
|
|
(Dry suit to Hat coupler repair falls under commercial price not dry suit)
|
|
|
|
|
|
|
|
|
|
|
Hourly Rates:
|
|
|
|
Regulator servicing usually takes about 1½ to 2 hours.
|
|
|
|
All other service work will be charged at a rate of $45 per hour. Please feel free to ask for a quote.
|
|
|
|
All prices subject to change without notice.
|
|
All prices do not include shipping or applicable sales taxes.
|
